This guide is provided for informational purposes. Firmware versions vary; menu names may differ slightly. When in doubt, contact your ISP for a bridge mode configuration file or support.
To set up your in bridge mode, you will need to access the router's web management interface. This process essentially turns off the device's routing functions (like DHCP and NAT) so you can use a separate, higher-quality router to manage your network. 1. Access the Admin Panel Zte F689 Bridge Mode
Currently, it was set to .
October 2023 Target Device: ZTE F689 (GPON/EPON ONT/ONU) Difficulty Level: Moderate This guide is provided for informational purposes
Open command prompt: telnet 192.168.1.1 Login: root / Zte521 Zte F689 Bridge Mode