| Component | Supported? | Notes | |-----------|------------|-------| | (64-bit) | ✅ Yes | SP1 required | | Windows 8.1 (64-bit) | ✅ Yes | | | Windows 10 (LTSC 2015/2016) | ⚠️ Limited | Not fully tested by Siemens; use with caution | | Windows 11 | ❌ No | Not supported | | Step 7 Professional V13 SP1 | ✅ Yes | Update 4 required | | WinCC Professional/Comfort V13 SP1 | ✅ Yes | Same update level recommended | | PLCSIM V13 SP1 | ✅ Yes | Install matching Update 4 | | S7-1200 CPUs (FW 4.1 – 4.4) | ✅ Yes | | | S7-1500 CPUs (FW 1.8 – 2.5) | ✅ Yes | | | S7-300/400 | ✅ Yes | Via compatible PG/PC interface |
Follow this procedure carefully to avoid corrupting your existing installation. Tia Portal V13 Sp1 Update 4
: Projects created in V13 SP0 must be updated to the V13.1 format when opened in SP1 Update 4. Note that TIA Portal generally does not support backwards conversion for projects modified in newer versions. Operating System Limits : V13 SP1 is officially not compatible with Windows 10 ; users on modern operating systems are advised to use V13 SP2 or newer Compatibility Requirement | Component | Supported
If you are working with an HMI device (like a Mobile Panel or Comfort Panel), follow these steps to initiate the reset: : Open the Control Panel on the HMI device. Navigate to System Properties > Reboot . Note that TIA Portal generally does not support