Epson L6460 Adjustment Program Link

Contact an Epson Service Center. Some will run the reset for a small fee ($20-$40) remotely via TeamViewer.

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | "Communication Error" | USB not detected or printer not in service mode | Re-enter service mode; try a different USB port; disable firewall | | 20000010 | Counter reset failed | Run the program as Admin; close all other Epson software (e.g., Status Monitor) | | "Not support this model" | Wrong program version | You have the L6490 or L6580 program; find the exact L6460 release | | Fatal error after reset | Physical pad overflow | Your pads were already saturated; replace pads immediately, then rerun the reset | Epson L6460 Adjustment Program

A: Theoretically 5-10 times. Practically, after 3 resets, the physical pad will be saturated. Install a waste ink tank for unlimited resets. Contact an Epson Service Center

The software itself is proprietary to Epson, but it is widely distributed online for free or for a small fee ($5–$10) from "resetter" websites. Practically, after 3 resets, the physical pad will