Lantek Expert Tutorial Jun 2026

| Error Message | Likely Cause | Lantek Expert Solution | | :--- | :--- | :--- | | "Open contour detected" | Gap in DXF geometry | Use Chain > Gap tolerance: 0.05mm | | "No technology assigned" | Missing material database | Go to Technology > Import default library | | "Pierce point outside part" | Lead-in is too long | Reduce lead-in length to 2mm | | "Post processor mismatch" | Wrong machine selected | Change machine in Setup > Config | | "Nesting failed 0 parts" | Part larger than sheet | Check part size vs. sheet stock list |

Most workflows begin by bringing in a CAD file. Lantek Expert supports DXF, DWG, and various 3D formats. Click on Import and select your file. lantek expert tutorial

: Select the correct material (e.g., Stainless Steel, Aluminum) and thickness from the database. This ensures the software applies the correct Technological Table (feed rates, gas pressures, and lead-ins). | Error Message | Likely Cause | Lantek

Below is a structured guide to getting started with Lantek Expert, covering everything from initial setup to final nesting. 1. Understanding the Workspace Click on Import and select your file

Now we place parts on the sheet. Lantek Expert offers two modes: (dragging) and Automatic (algorithm).