: Plug your printer into the USB port on the back of the router and ensure the printer is turned on.
After installation, you will find a in your system tray (bottom-right corner). Here is how to configure it for high-quality printing.
: If you prioritize a stable, direct communication link over potentially flaky wireless printer signals, this wired router-to-printer setup is a strong option.
If you own a Tenda router or print server equipped with a USB port, the is an essential utility. This software allows you to transform a standard USB printer into a wireless network printer, accessible by multiple computers without physically plugging and unplugging cables.
Navigate to the website. Look for the "Downloads" section and enter your specific router model (e.g., Tenda AC15, AC18, or AC19). The Printer Controller Utility is usually listed under the "Utility" or "Firmware" tab for routers that feature a USB port. 2. Run the Installation Wizard Once the high-quality installation package is downloaded: Extract the ZIP folder. Double-click the Setup.exe file.
| Problem | Likely Fix | |---------|-------------| | Controller doesn’t find the router | Ensure your PC is on the same subnet (e.g., 192.168.0.x) and disable Windows firewall temporarily. | | “Port already in use” error | Restart the Print Spooler service ( services.msc ) and relaunch the Tenda tool. | | Printer goes offline after reboot | Set the Tenda USB Printer Controller to launch at startup (check “Auto-run on boot”). | | Driver not working | Install the printer’s official driver first; then run Tenda’s utility. |
