Connect the DS100E to your PC via USB and a 12V power source. Open the Delphi/Autocom software and navigate to Hardware Setup Select the correct COM port and click Once the VCI is detected, click
“Talk to me, Maya,” Commander Royce’s voice crackled through the comms. “Why is Loop B offline?” delphi ds100e firmware update problem link
| Error Code | Meaning | The "Link" Fix | | :--- | :--- | :--- | | | NAND flash wear | You need the Low-Level Format Tool link (Request via support ticket). | | ERR-0xF0AC | Partition mismatch | Use the Scatter File link inside the bootloader folder, not the root. | | Status 0xC0060005 | USB enumeration fail | Switch to a USB 2.0 port and use the libusb filter driver link (Zadig tool). | Connect the DS100E to your PC via USB and a 12V power source
If the test succeeds but shows the firmware is outdated, click the button. The "Force Update" Method : | | ERR-0xF0AC | Partition mismatch | Use
: In the software settings, ensure the correct COM port is selected. Run a
Open on your PC. If you see an "Unknown Device" or a yellow warning icon, right-click it and select Update Driver Software .
: The firmware bar may stop moving if the COM port is busy or improperly configured.