While updating the firmware can be beneficial, it also carries some risks. If not done correctly, a firmware update can:
Flashing firmware on an FC1178BC is risky. If you use the wrong MP tool (Mass Production tool), you will brick the drive permanently.
The FC1178BC is a small QFN-32 package. You need to short (pin 23 or 24) to Ground (pin 18 or 19). Alternatively, on many PCB designs, short the two holes of the LED (solder pads for the status light).
While updating the firmware can be beneficial, it also carries some risks. If not done correctly, a firmware update can:
Flashing firmware on an FC1178BC is risky. If you use the wrong MP tool (Mass Production tool), you will brick the drive permanently. firstchip fc1178bc firmware hot
The FC1178BC is a small QFN-32 package. You need to short (pin 23 or 24) to Ground (pin 18 or 19). Alternatively, on many PCB designs, short the two holes of the LED (solder pads for the status light). While updating the firmware can be beneficial, it