You are connected via IPv4 from 185.104.194.44
To force the usage of IPv6, visit Speedtest6.Tele2.NET.
To force the usage of IPv4, visit Speedtest4.Tele2.NET.
The Tele2 Speedtest Service helps you test your Internet connection speed through various methods and is available not only to customers of Tele2 but anyone with an Internet connection. Test your connection using speedtest.net's tool, downloading a file via your web browser (HTTP) or downloading and uploading via FTP.
Speedtest is run on a number of fast servers in locations throughout Europe connected to Tele2's international IP core network with 10GE. The address http://speedtest.tele2.net is anycasted, meaning that you should automatically be served by the server closest (network wise) to your location. Read more about the technical details of this service.
You are currently being served by xxx-SPEEDTEST-1 located in City, Country.
Historically known simply as the "National Fire Alarm Code," the title was officially changed to the in 2010.
For building owners: Compliance is not a cost; it is an investment in liability protection and human life. nfpa.72
You cannot just blow canned smoke at a detector. NFPA 72 requires a "calibrated test method" using a magnet or a meter to ensure the detector is within its listed sensitivity range (e.g., 0.5% to 3.5% obscurity). If it is too sensitive (nuisance alarms) or not sensitive enough (miss fire), it must be cleaned or replaced. Historically known simply as the "National Fire Alarm
The NFPA updates NFPA 72 on a three-year cycle (e.g., 2019, 2022, 2025). Knowing the edition your local Authority Having Jurisdiction (AHJ) uses is critical. Below are the core structural elements. NFPA 72 requires a "calibrated test method" using
This code provides requirements for the design, installation, testing, and maintenance of fire alarm systems and other signaling systems. The scope includes:
In addition to the files offered here via HTTP, there is also an FTP server setup to serve files, you'll reach it at ftp://speedtest.tele2.ee. You can upload files to /upload. Uploaded files will be automatically removed as soon as the upload is complete.
speedtest.net is an easy to use web-based (Flash) test to test both upload and download speeds as well as latency to any of a long list of servers around the world. Tele2 Speedtest servers runs a speedtest.net server. Go to speedtest.net to test your connection. This server (xxx-SPEEDTEST-1) will automatically be picked for you. After the test you can choose a another server and location to perform further testing.
The Tele2 Speedtest service is distributed over multiple machines spread across locations in Europe. By going to http://speedtest.tele2.net you will always end up on the closest location (network-wise) to you. You can specifically select another test node from the below list if you want to perform tests towards a particular location.
Historically known simply as the "National Fire Alarm Code," the title was officially changed to the in 2010.
For building owners: Compliance is not a cost; it is an investment in liability protection and human life.
You cannot just blow canned smoke at a detector. NFPA 72 requires a "calibrated test method" using a magnet or a meter to ensure the detector is within its listed sensitivity range (e.g., 0.5% to 3.5% obscurity). If it is too sensitive (nuisance alarms) or not sensitive enough (miss fire), it must be cleaned or replaced.
The NFPA updates NFPA 72 on a three-year cycle (e.g., 2019, 2022, 2025). Knowing the edition your local Authority Having Jurisdiction (AHJ) uses is critical. Below are the core structural elements.
This code provides requirements for the design, installation, testing, and maintenance of fire alarm systems and other signaling systems. The scope includes:
If you are interested in performing more in-depth studies and high-performance measurements, please contact bgp4-adm _at_ tele2.net directly.