Pan186cv Datasheet

Integrated 2.4GHz RF transmitter and receiver.

Because the PING))) uses a single pin for both input and output, the code must switch the pin mode dynamically.

The PING))) is an ultrasonic sensor widely used in robotics and automation projects to measure distance to objects. It operates by emitting an ultrasonic pulse and measuring the time it takes for the echo to return.

Note: Exact numeric values (flash/RAM sizes, TX power max, currents, package dimensions) vary by PAN186CV sub-variant and vendor release — verify against the official vendor datasheet before final designs.

: Includes a clock source, timer, PWM generator, hardware comparator, and Low Voltage Reset (LVR) Power Efficiency

The is a specific variant of the PAN186 System-on-Chip (SoC) family developed by Panchip Microelectronics . It is primarily categorized as an 8-bit microcontroller with an integrated 2.4GHz wireless transceiver, designed for cost-effective wireless communication and audio processing. Overview and Functional Role

| Parameter | Specification | | :--- | :--- | | | 5.0 V DC (Typical), 3.3 V to 6.0 V (Operational Range) | | Supply Current | 30 mA typical; 35 mA max | | Communication | 1-pin digital interface (Pulse Width Modulation) | | Range | 2 cm (0.8 in) to 3 m (9.8 ft) | | Resolution | 1 cm (approx. depending on microcontroller timing) | | Frequency | 40 kHz (Ultrasonic burst) | | Dimensions | 22 mm (W) x 46 mm (L) x 16 mm (H) | | Operating Temp | 0°C to 70°C (32°F to 158°F) |