Weihong Cnc Adaptor | Pcimc 3d Driver Work [top]

protocol to communicate with stepper or servo motor drivers. File Compatibility : Supports standard HPGL-3D codes

To get your Weihong CNC Adaptor PCIMC-3D working with , you need to manually link the hardware driver to the software installation directory. Quick Setup Steps Install Software First weihong cnc adaptor pcimc 3d driver work

| Issue | Likely Cause | Solution | | :--- | :--- | :--- | | | Driver not installed or IRQ conflict. | Move card to a different PCI slot. Reinstall drivers in Safe Mode. | | Machine moves wrong direction | Active Low/High setting. | In System Parameters -> I/O, toggle the "Dir Active Level" for that axis. | | Rough 3D finish | Acceleration/Velocity too high. | Reduce the "Max Acc" (Acceleration) in axis parameters. Increase "Filter" time. | | Spindle won't start | Frequency/MHz mismatch. | Check the PWM frequency settings match your VFD requirements. | protocol to communicate with stepper or servo motor drivers

Right-click on the device (or Weihong CNC Adaptor ) and select Update Driver Software . | Move card to a different PCI slot